CEATI » Interest Groups » Transmission » WISMIG » Current Projects

Wind and Ice Storm Mitigation Interest Group - Current Projects

• Geospatial-Temporal Database of Damaging Ice and Wind Storms
• FRP Foundation Applications - Grillage Footings
• A Pilot Study: Modeling and Forecasting Icing Events Using Regular Weather Models
• Assessment of Sag-tension software versus measured sags at high temperature
• Sensor for wireless real time monitoring of overhead lines
• Review of Technologies to detect sub-surface soil conditions
• Fujikura De-Icing Device Evaluation (LC Rods)
• Evaluation of SEFAG VIBREC 400 Vibration Recorder on AGS Clamp Systems
• Technology Watch: Sag-Tension Software for High Temperatures
• Advantages of Using the Approach to Define the Post-Elastic Capacity of Lattice Towers
• Lightning Phenomenon and Solutions to Protect Overhead Lines Against Lightning
• The Impact of Unbalanced Ice Loads and Security Measures/Loads on Line/Structure Designs
• Component Strength Under Very Short Dynamic Loading
• Dynamic Modeling of an HV Transmission Line Using the ANCO Load-Limiting Device
• Development of Common Structures for Emergency Restoration
• Real-Time Monitoring of Energized Overhead Transmission Lines for Thermal Rating, Clearance Measurement and Climatic Data (Temperature, Wind and Ice)
• Guide to Define Design Criteria for Substation Insulation Taking into Account Pollution and Icing
• Improvement of the U.S. Map of Equivalent Radial Ice Thickness for a 50-Year Return Period With Concurrent Wind Speeds Using Data From Weather Stations in Canada Near the Common Border
• Updating the Wind and Ice Loads Design Information Used for Reliability Based Design in CSA 22.3 #1-01
• Comparison of Wind Load Methodologies for Lattice Transmission Line Towers
• Modeling and Prediction of Failure of Transmission Lines due to High Intensity Winds - Phase II
• Design Guide to Control Galloping of Transmission Line Conductors
• Galloping Phenomena, Occurring Problems and Solutions
• Guide to Assist Utility Design Engineers to Assess Line Reliability Considering Both Reliability and Security Loads
• ADINA Modelling Guide and Benchmark Tests for Component Failure Analysis in Overhead Line Sections
• Laboratory Evaluation of Aeolian Vibration Recorders for Transmission Line Single Conductors
• Cost Benefit Analysis for Overhead Lines by Comparing Two Design Alternatives (Overhead Ground Wires versus Surge Arresters)
• Assessing the Performance of a De-Icing Robot Inducing Vibrations on the Conductor

WISMIG: Home | Meeting Schedule | Current Projects | Completed Projects | Workshops